Table of Contents
Advertisement
EXTENSION CORD CAUTION
When using a power tool at a considerable distance from a power
source, be sure to use an extension cord that has the capacity to
handle the current the tool will draw. An undersized cord will cause
a drop in line voltage, resulting in overheating and loss of power.
Use the chart to determine the minimum wire size required in an
extension cord. Only round jacketed cords should be used.
When working with a tool outdoors, use an extension cord that is
designed for outside use. This is indicated by the letters "WA" on
the cord's jacket.
Before using any extension cord, inspect it for loose or exposed
wires and cut or worn insulation.
• SERVICE
Now that you have purchased your tool, should a need ever exist for repair parts or
service, simply contact your nearest Ryobi Authorized Service Center. Be sure to
provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your
nearest Ryobi Authorized Service Center. You can also check our web site at
www.ryobitools.com for a complete list of Authorized Service Centers.
• MODEL NO.
The model and serial numbers of your tool will be found on the data plate attached to the
tool. Please record the serial number in the space provided below.
•
MODEL NUMBER
•
SERIAL NUMBER
983000-017
11-02
OPERATOR'S MANUAL
Belt/Disc Sander
Model BD4600
RYOBI TECHNOLOGIES, INC.
1428 Pearman Dairy Road
Post Office Box 1207
Phone 1-800-525-2579
www.ryobitools.com
**Ampere rating
0-2.0
(on tool data plate)
Cord Length
25'
16
50'
16
100'
16
CAUTION: Keep the extension cord clear of the working
area. Position the cord so that it will not get caught on workpiece,
tools, or other obstructions while you are working with a power
tool.
BD4600
Anderson, SC 29625
Anderson SC 29622-1207
2.1-3.4
3.5-5.0
5.1-7.0
7.1-12.0 12.1-16.0
Wire Size (A.W.G.)
16
16
16
14
16
16
14
14
16
14
12
10
**Used on 12 gauge - 20 amp circuit.
14
12
—
Hide quick links:
Advertisement
Table of Contents
