Tool Stickers And Tags - Stanley DS12 User Manual

To avoid seriou s injury o r death
28409
DANGER
Failure to use hydraulic hose labeled and certified Failure to use hydraulic hose labeled and certified
as non-conductive when using hydraulic tools on as non-conductive when using hydraulic tools on
or near electric lines may result in death or or near electric lines may result in death or
serious injury. serious injury.
For proper and safe operation read owners manual For proper and safe operation read owners manual
and mwke sure that you have been properly and mwke sure that you have been properly
trained in correct procedures required for work trained in correct procedures required for work
ELECTROCUTION
on or around electric lines. on or around electric lines.
HAZARD
12412
71071 Name Tag
11207
L
W A
11212
The safety tag (p/n 15875) at
right is attached to the tool
when shipped from the factory.
Read and understand the safety
instructions listed on this tag
before removal. We suggest
you retain this tag and attach it
to the tool when not in use.
TOOL STICKERS & TAGS
Always keep critical tool markings, such as labels and
warning stickers legible. Always replace stickers or decals
that have become worn or damaged.
71073 CE Tool Plate
SAFETY TAG P/N 15875
28409
Composit Decal
1. FAILURE TO USE HYDRAULIC HOSE LABELED AND CERTIFIED AS
NON-CONDUCTIVE WHEN USING HYDRAULIC TOOLS ON OR NEAR
ELECTRICAL LINES MAY RESULT IN DEATH OR SERIOUS INJURY.
BEFORE USING HOSE LABELED AND CERTIFIED AS NON-
CONDUCTIVE ON OR NEAR ELECTRIC LINES BE SURE THE HOSE
IS MAINTAINED AS NON-CONDUCTIVE. THE HOSE SHOULD BE
REGULARLY TESTED FOR ELECTRIC CURRENT LEAKAGE IN ACCORDANCE
WITH YOUR SAFETY DEPARTMENT INSTRUCTIONS.
2. A HYDRAULIC LEAK OR BURST MAY CAUSE OIL INJECTION INTO THE
BODY OR CAUSE OTHER SEVERE PERSONAL INJURY.
A DO NOT EXCEED SPECIFIED FLOW AND PRESSURE FOR
THIS TOOL. EXCESS FLOW OR PRESSURE MAY CAUSE A
LEAK OR BURST.
B DO NOT EXCEED RATED WORKING PRESSURE OF HYDRAU
LIC HOSE USED WITH THIS TOOL. EXCESS PRESSURE MAY
CAUSE A LEAK OR BURST.
C CHECK TOOL HOSE COUPLERS AND CONNECTORS DAILY
FOR LEAKS. DO NOT FEEL FOR LEAKS WITH YOUR HANDS.
CONTACT WITH A LEAK MAY RESULT IN SEVERE PERSONAL
INJURY.
I M P O R T A N T
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE OPERA-
TION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE
(shown smaller then actual size)
7
12412
Warning Decal
71071
Name Tag Decal
D DO NOT LIFT OR CARRY TOOL BY THE HOSES. DO NOT ABUSE HOSE.
DO NOT USE KINKED, TORN OR DAMAGED HOSE.
3. MAKE SURE HYDRAULIC HOSES ARE PROPERLY CONNECTED TO THE
TOOL BEFORE PRESSURING SYSTEM. SYSTEM PRESSURE HOSE MUST
ALWAYS BE CONNECTED TO TOOL "IN" PORT. SYSTEM RETURN HOSE
MUST ALWAYS BE CONNECTED TO TOOL "OUT" PORT. REVERSING CON-
NECTIONS MAY CAUSE REVERSE TOOL OPERATION WHICH CAN RESULT
IN SEVERE PERSONAL INJURY.
4. DO NOT CONNECT OPEN-CENTER TOOLS TO CLOSED-CENTER HYDRAULIC
SYSTEMS. THIS MAY RESULT IN LOSS OF OTHER HYDRAULIC FUNCTIONS
POWERED BY THE SAME SYSTEM AND/OR SEVERE PERSONAL INJURY.
5. BYSTANDERS MAY BE INJURED IN YOUR WORK AREA. KEEP BYSTANDERS
CLEAR OF YOUR WORK AREA.
6. WEAR HEARING, EYE, FOOT, HAND AND HEAD PROTECTION.
7. TO AVOID PERSONAL INJURY OR EQUIPMENT DAMAGE, ALL TOOL REPAIR
MAINTENANCE AND SERVICE MUST ONLY BE PERFORMED BY AUTHO-
RIZED AND PROPERLY TRAINED PERSONNEL.
I M P O R T A N T
READ OPERATION MANUAL AND
SAFETY INSTRUCTIONS FOR THIS
TOOL BEFORE USING IT.
USE ONLY PARTS AND REPAIR
PROCEDURES APPROVED BY
STANLEY AND DESCRIBED IN THE OPERA-
TION MANUAL.
TAG TO BE REMOVED ONLY BY
TOOL OPERATOR.
SEE OTHER SIDE