Ready For Operation; The Main Control Options; Your Heating System Comes Factory Preset - Viessmann VITODENS 200 WB2 Series Operating Instructions & User's Information Manual

Ready for Operation

The Main Control Options

Your heating system comes factory preset ...

12
All settings can be adjusted directly on the boiler control or on the remote control
(when the programming unit is used as remote control).
The programming unit can be removed from the control unit and mounted on a
wall-mount base (available as accessory) anywhere in your main living area and used
as a remote control. In instances where the programming unit is used as remote
control, a temperature indicator (available as accessory) must be installed in place of
the programming unit in the control base on the boiler.
The control unit is located behind the hinged cover in the front of the boiler. Open
hinged cover of the control by exerting slight pressure with your fingertip on top of
the cover. Ensure hinged cover is closed after every use to guarantee splash
protection.
The control unit comes factory preset to a standard operating mode.
This means your heating system is ready for operation.
All factory default settings can be changed to reflect your personal preferences.
Date and time
The date and time are factory preset
and are updated through the built-in
long-life battery.
Should time and/or date be incorrect
please see section entitled "Changing
Time and Date" on page 25 in this
manual.
Heating program
The heating program is set to "Space
heating and domestic hot water", i.e.
space heating and domestic hot water
production take place in accordance
with preset switching times.
Switching times
The switch-on time is set to 6:00 hrs,
the switch-off time to 22:00 hrs.
Between 6:00 hrs and 22:00 hrs, space
heating takes place at normal room
temperature with domestic hot water
production (if installed) when required.
Between 22:00 hrs and 6:00 hrs, space
heating takes place at reduced room
temperature.
Press button "D" to reset the
switching times to their factory
default settings.
Please note that this will reset all
altered values to their original factory
default setting.