Console Mast Cable Replacement - Horizon Fitness T61 Service Manual

C on sol e Mast Cable Re p l a c e me n t
Tools Required:
• Philips Screwdriver
• 5mm Allen Wrench
• Needle-nose Pliers
Procedure:
1) Turn off the power to the treadmill and unplug the power cord from the wall outlet.
) For Models T61 -T64/CST 3.5 & 4.5/DT650 & 850/WT950/1.2T Only - Remove the motor cover.
3) For Models T61 -T64/CST 3.5 & 4.5/DT650 & 850/WT950/1.2T Only - Disconnect the console cable
from the lower control board.
4) For Models PST 6 & 8/ 2.2T-5.2T Only – Lift up right side console mast boot or remove right side
cover. (Figures 59, 60)
Fi gur e 59
5) For Models PST 6 & 8/ 2.2T-5.2T Only – Remove screws holding console mast to base frame. (Fig-
ure 61, 6)
6) For Models PST 6 & 8/ 2.2T-5.2T Only - Disconnect console cable on base of the machine near the
console mast. (Figure 61, 6)
Fi gur e 61
56
F i g u r e 6 0
F i g u r e 6 2