Micathermic Heater - Soleus Air HM2-15-32 Owner's Manual

ASSEMBLY
1. Remove the heater body, two wheelbases, wheels, screws, and washers from the box. Remove the pack-
aging materials and keep for future storage.
2. Attach the wheels to each wheelbase with the supplied wheel screws, small spring-washers, and small
washers.
WHEEL BASE
3. Be certain the heater is unplugged and the controls are set to off. Set the heater on the floor upside down.
4. Attach a wheel base (with wheels attached) to each end of the heater body using the supplied standard
screws, large spring-washers, and large washers.
WHEEL SCREW
STANDARD SCREW
WHEEL BASE
WHEEL
SMALL SPRING WASHER
SMALL WASHER
LARGE SPRING WASHER
LARGE WASHER

MICATHERMIC HEATER

6