Table of Contents
Advertisement
ASSEMBLY
1. Remove the heater body, two wheelbases, wheels, screws, and washers from the box. Remove the pack-
aging materials and keep for future storage.
2. Attach the wheels to each wheelbase with the supplied wheel screws, small spring-washers, and small
washers.
WHEEL BASE
3. Be certain the heater is unplugged and the controls are set to off. Set the heater on the floor upside down.
4. Attach a wheel base (with wheels attached) to each end of the heater body using the supplied standard
screws, large spring-washers, and large washers.
WHEEL BASE
www.sylvane.com 1-800-934-9194
WHEEL SCREW
WHEEL
STANDARD SCREW
SMALL SPRING WASHER
SMALL WASHER
LARGE SPRING WASHER
LARGE WASHER
MICATHERMIC HEATER
6
Hide quick links:
Advertisement
Table of Contents
