Sony HDC-900 Installation And Maintenance Manual page 94

4-8. File items
MSU connected only
item
V DTL CREATION MODE
V DTL CONTROL MODE
KNEE MAX
AUTO KNEE POINT
WHITE SETUP MODE
shows an analog item which will not be indicated as 0 after being stored.
O shows an analog item which will be indicated as 0 after being stored.
shows a switch which will be stored in the select item.
REF returns the status to the one when stored in the reference file.
OHB returns the status to the one when stored in the OHB file.
If mentioned as ON or OFF, the values will be same as ON or OFF.
If mentioned as _, the value does not change.
(*1): In SKIN DETAIL GATE 1/2/3, one among 1, 2 and 3 is to be set ON.
(*2): Refer to Section 4," Setup Menu".
(*3): Only when using standalone
(*4): WHITE value stored is used when the extender ON.
(*5): The state depends on the one of the external switch when the standalone state.
(*6): When connecting to the MSU (master setup unit), the memory enters the temporally released state. As PRESET
brings WHITE R/G/B to 0, regardless of the factory setting value of 3200K, if changing WHITE R/G/B and per-
forming REFERENCE STORE, the specified value is recalled as PRESET.
(*7): When WHITE SETUP MODE setting is ABW, the value when selecting AWB is returned and when selecting
AUTO LEVEL, 0 is returned.
(*8):
Setting 1
VF
screen
indicates the auto iris window frame.
(*9): Shows items to be called when [STANDARD] is executed, that is the reference file is called.
(*10): These items can be set only when HKC-T950 is connected.
(*11): Saved in the cable adaptor of HKC-T950.
4-16 (E)
OPERATOR REFERENCE SCENE
_
_ _
_
OFF
_ _
_ _ _
2
OHB LENS STANDARD
_ _
REF
_ _
REF
_ _
OFF
_ _ REF
_ _ _
3 4
(*9)
Power is Factory
turned ON set
_
Y
_
H/V
OFF OFF
_ 0
_ AWB
5 6
HDC-900/950 IMM