Sony HDC-900 Installation And Maintenance Manual page 66

3-5. MAINTENANCE Menu
MULTI FORMAT page
HDC-900/950
<MULTI FORMAT>
CURRENT 59.94I
NEXT : 59.94I
60I 50I
59.94I
30PsF 25PsF 24PsF
29.97PsF
Item Setting
CURRENT
NEXT a)
a) This setting is valid only when the camera is used alone. When the camera control unit is connected, the camera control unit setting
takes a priority.
SDI page (Displays ROM Version lower than 1.30)
OUT PUT page (Displays ROM Version 1.30 or higher)
ROM Version lower than 1.30
<SDI>
PROMPTER : OFF
BNC SDI OUT: OFF
Item Setting
PROMPTER a) ON, OFF
BNC SDI OUT b) ON, OFF
c)
LINER EXP ON, OFF
a) This setting is valid only when the camera control unit is connected, yet in the camera is used alone, setting is disabled. ("—" is
displayed.)
b) This setting is valid only when the camera is used alone. When the camera control unit is connected, setting is always ON. ("—" is
displayed.)
c) This can be selected when the VA-223 board is installed.
3-22 (E)
(Display is initial values.)
23.98PsF
Description
Displays the format being currently selected.
The currently selected format is highlighted in the line below.
Selects the format when the power is turned on next time.
HDC-900/910 :
A turn of the MENU SELECT control shifts the portion highlighted.
Press the MENU SELECT switch toward the "ENTER" side for determi-
nation. (The highlighted portion does not shift to the *** portion.)
HDC-950/930 :
A turn of the rotary encoder shifts the portion highlighted. Press the
rotary encoder for determination. (The highlighted portion does not shift
to the *** portion.)
(Display is initial values.)
Description
ON : Prompter signal is output at PROMPTER OUT connector
OFF : No prompter signal is output
ON : SDI signal is output at HD SERIAL DIGITAL OUT connector
OFF : No SDI signal is output
ON : Improves the reproducibility of high-luminance part in PsF
format.
OFF : Standard setting.
HDC-910/930
<MULTI FORMAT>
CURRENT 59.94I
NEXT : 59.94I
60I 50I
59.94I
ROM Version 1.30 or higher
<OUT PUT>
PROMPTER : OFF
BNC SDI OUT: OFF
LINER EXP : OFF
HDC-900/950 IMM