Sony HDC-900 Installation And Maintenance Manual page 56

3-4. PAINT Menu
KNEE page
ROM Version lower than 1.30
<KNEE>
[R] [G] [B] [M]
POINT : 0 0
SLOPE : 0 0
WHT CLP: 0 0
KNEE SAT LEVEL
KNEE : ON
KNEE SAT: OFF
WHT CLIP: ON
TEST : OFF
Item Setting
POINT _99 to 99
R/G/B/M
SLOPE _99 to 99
R/G/B/M
WHT CLP _99 to 99
R/G/B/M
KNEE SAT LEVEL a) _99 to 99
KNEE ON, OFF
a)
KNEE SAT ON, OFF
WHT CLIP ON, OFF
AUTO KNEE b) ON, OFF
KNEE SAT b) _99 to 99
ON, OFF
TEST OFF, 1, 2
a) These items are displayed only when the ROM version on the AT board of the unit is lower than Ver 1.30.
b) These items are displayed only when the ROM version on the AT board of the unit is Ver 1.30 or higher.
3-12 (E)
(Display is initial values.)
0 0
0 0
0 0
0
Description
Sets the knee point level when the settings of the auto knee function
of the R, G, B and master are OFF.
Sets the knee slope level when the settings of the auto knee function
of the R, G, B and master are OFF.
Sets the white clip level of the R, G, B and master.
Sets the knee saturation level.
Sets the knee correction circuit to ON or OFF.
Sets the knee saturation function to ON or OFF.
Sets the white clip function to ON or OFF.
Sets the auto knee function to ON or OFF.
Sets the knee saturation level.
Sets the knee saturation function to ON or OFF.
Selects the test signal.
OFF : Provides no test signals.
1 : Provides the test signal of the sawtooth waveform.
2 : Provides the test signal of the sawtooth waveform of digital output.
ROM Version 1.30 or higher
<KNEE>
[R] [G] [B] [M]
POINT : 0 0
SLOPE : 0 0
WHT CLP: 0 0
KNEE : ON WHT CLIP :
AUTO KNEE : OFF
KNEE SAT : 0
: OFF
TEST : OFF
0 0
0 0
0 0
ON
HDC-900/950 IMM