Sony HDC-900 Installation And Maintenance Manual page 58

3-4. PAINT Menu
SKIN DETAIL page
<SKIN DETAIL>
SKIN DTL : OFF
SKIN GATE: OFF
[1] [2]
CH SW : (ON) OFF
GATE : ON OFF
PHASE : AUTO AUTO
: 0
WIDTH : 30 30
SAT : -89 -89
LEVEL : 0
Item Setting
SKIN DTL ON, OFF
b)
SKIN GATE ON, OFF
CH SW ON, OFF
GATE ON, OFF
PHASE AUTO
0d to 359d
WIDTH 0d to 90d
SAT _99 to 99
LEVEL _99 to 99
a) Method of executing AUTO
HDC-900/910 : 1. Set the cursor to the AUTO and press the MENU SELECT switch toward the "ENTER" side, then the square-
shaped zebra pattern is displayed on the viewfinder.
2. Set the zebra pattern to the color to be given the effect of the skin tone detail and press the MENU SELECT
switch toward the "ENTER" side. to select the phase.
HDC-950/930 : 1. Set the cursor to the AUTO and press the rotary encoder, then the square-shaped zebra pattern is displayed on
the viewfinder.
2. Set the zebra pattern to the color to be given the effect of the skin tone detail and press the rotary encoder to
select the phase.
b) This item is displayed only when the ROM version on the AT board of the unit is lower than Ver 1.30.
3-14 (E)
(Display is initial values.)
[3]
OFF
OFF
AUTO
0 0
30
-89
0 0
Description
When this setting is ON, the setting [1] of the channel 1 is always set
ON. Sets the skin detail function to ON or OFF.
Sets the zebra indication of the skin tone detail portion to ON or OFF.
Sets each channel of the skin detail function to ON or OFF.
Channel 1 is fixed to ON.
Sets each channel of the skin gate function to ON or OFF.
a)
Set automatically the region of each channel the skin detail function affects.
Sets the center phase of the chroma phase the skin tone detail function
affects to each channel.
Adjusts the chroma phase width of the skin tone detail function to each
channel.
Adjusts the saturation level of the skin tone detail function to each channel.
Sets the skin tone detail amount to each channel.
HDC-900/950 IMM