Projection Distance Formula - Sony VPL-FHZ55 Operating Instructions Manual

Projection distance
Projection image size
Diagonal
80" (2.03 m)
100" (2.54 m)
120" (3.05 m)
150" (3.81 m)
200" (5.08 m)

Projection distance formula

D: Projected image size (Diagonal)
Lens Projection distance L (minimal length) Projection distance L (maximal length)
Standard lens
Note
Do not use any lens other than the standard lens.
Lens shift range
60%
32%
About lens position
The projection distance and lens shift range
are measured with the lens position adjusted
to the center. To adjust the lens position to
the center, follow the procedures below:
1
Rotate the left lens shift dial clockwise
or counterclockwise then align the
lens fixing screws with the v V marks
in four places, as illustrated, for
adjusting the lens horizontally.
2
Rotate the right lens shift dial
clockwise until the lens is fixed, to
adjust the lens vertically.
Width × Height
1.72 × 1.08 (68 × 42)
2.15 × 1.35 (85 × 53)
2.58 × 1.62 (102 × 64)
3.23 × 2.02 (127 × 79)
4.31 × 2.69 (170 × 106)
L=0.030453 × D – 0.0465
(L=1.198941 × D – 1.8307)
VS
32% VS
HS
Projection distance L
Standard lens
2.39 – 3.83 (95 – 150)
3.00 – 4.80 (119 – 189)
3.61 – 5.77 (143 – 227)
4.53 – 7.22 (179 – 284)
6.05 – 9.64 (238 – 379)
L=0.048463 × D – 0.0443
(L=1.907978 × D – 1.7435)
= 60 – 1.875 × HS (HS
+
= 0 [%]
–
= HS = 32 – 0.533 × VS
+ –
Lens fixing screws
1
For adjusting
lens
horizontally
Note
Before adjusting the lens position to the center
and checking whether the lens position is
centered, turn off the power to prevent
projected light from entering the eyes.
Projection Distance and Lens Shift Range
Unit: m (inches)
Unit: m (inches)
or HS ) [%]
+ –
[%]
+
2
For adjusting
v V
lens
marks
vertically
47