Selecting The Audio Input Signal (A-In Ch-1~Ch4); Setting Emphasis (Emphasis); Selecting The Monitor Output Signal; Pf2 Menu (Factory Settings) - Sony HDW-F500 Operation Manual

4-6 PF2 Menu (Factory Settings)

4-6-1 Selecting the Audio Input
Signal (A-IN CH-1~CH4)
Function buttons [F1] (A-IN CH1) to [F4] (A-IN CH4)
select the audio input signal for the various channels.
SDI: Selects the audio signal input through the HD
SDI INPUT connector.
AES/EBU: Selects the audio signal input through the
AUDIO INPUT (AES/EBU) connectors.
anal g : Selects the audio signal input through the
AUDIO INPUT connectors.
[SDTI] (Only when the optional HKDV-506A SDTI
Board is installed.):
to the SDTI (OPTION) IN connector is selected
for the input video signal, the audio signal input
to the SDTI (OPTION) IN connector is
automatically selected for the input audio signal as
well. SDTI is displayed and can not be changed.
4-6-2 Setting Emphasis
(EMPHASIS)
To apply emphasis to a digital audio signal that has
been converted from an analog input audio signal, set
the [F7] (EMPHASIS) button to on.
4-60
Chapter 4 Menu Settings
When the SDTI signal input
4-6-3 Selecting the Monitor
Output Signal (MON-L SEL/MON-
R SEL)
The [F9] (MON-L SEL) and [F10] (MON-R SEL)
buttons allow you to specify the audio channel to be
output from the left and right MONITOR OUTPUT
connectors, respectively.
1: Audio channel 1
2: Audio channel 2
3: Audio channel 3
4: Audio channel 4
5: Analog cue channel
When multiple channels are selected for a single
connector, all of the numbers are displayed.
Select the output signal to be monitored as follows:
Making the setting
Follow the steps below to set the monitor output
signal.
1
Press the [F9] (MON-L SEL) or [F10] (MON-R
SEL) button.
The setting display section lights up.
2
Press numeric buttons 1 to 4 to select audio
channels 1 to 4, or numeric button 5 for the analog
cue channel.
Example: Pressing numeric buttons 1 and 2 selects
audio channels 1 and 2, leaving audio channels 3
and 4, and the analog cue channel off.
"12..." appears in the display.
3
To set the entered audio channels, press the
respective function button ([F9] or [F10]).