Selecting The Output Signals(Pb/Ee); Record Inhibit Mode (Rec Inh) - Sony HDW-F500 Operation Manual

4-2 HOME Menu
4-2-1 Selecting the Output
Signals(PB/EE)
The audio/video output signals from the line output
and monitor output connectors can be temporarily
changed from their current settings to another set of
settings by pressing the [F1] (PB/EE) button. The
video, digital audio, and analog cue channel output
signals are toggled to the other set of settings while the
button is pressed.
Output Signal Selection
Output signal selection is made using the 017.PB/EE
SELECT MENU. Output signal types for different
operation modes of this VTR are shown below.
Output
Channel
VTR
Operation
Mode
Standby off EE/EE
Standby on PB/MU
Playback
Record EE/EE
Edit EE/EE
3)
Shuttle PB/MU
Jog PB/PB
Variable PB/PB
INPUT CHECK
button
1) Output signals during playback are PB/PB only. Output
signals cannot be selected with 017.PB/EE SELECT
MENU.
2) When the INPUT CHECK button is held down, the
INPUT signals (audio and video) are output. Output
signals cannot be selected with 017.PB/EE SELECT
MENU. When the INPUT signals are output, only
monitor output is changed. Line output signals are not
changed.
3) Pressing the [F1] (PB/EE) button changes the output
signals during shuttle mode in the following ways.
VTR SETUP MENU 017. PB/
EE SELECT MENU settings
PB/MU
PB/PB
EE/EE
4-16
Chapter 4 Menu Settings
Video/Audio
PB/MU
EE/EE EE/MU
PB/PB 1)
PB/PB
PB/PB
EE/EE PB/PB
PB/MU
PB/MU
2)
INPUT
Output signals while the
[F1] (PB/EE) button is held
down
EE/EE
EE/EE
PB/MU
Note
When PB/PB is selected during shuttle mode, audio
output is muted for playback speeds of more than –1 or
+2 times normal speed.
4-2-2 Record Inhibit Mode
(REC INH)
Record inhibit mode is selected by pressing the [F2]
(REC INH) button. Every time the button is pressed,
the setting toggles between off and <all, crash REC,
video/CTL, audio/CTL>.
The record inhibit area is selected using the 003.REC
INHIBIT AREA select setting in the VTR SETUP
menu.
all: All recording is prohibited. (The REC INHIBIT
indicator will be lit.)
crash REC: The normal record mode is disabled.
Use this setting when you want to record only
during assemble editing or insert editing.
video/CTL: Video and CTL signal recording is
inhibited.
Audio/CTL: Audio and CTL signal recording is
inhibited.
[casst]: This is displayed when recording is inhibited
because the record-protect plug is set. This setting
cannot be selected.
REC INHIBIT indicator