Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Inspect contents of the box to ensure all parts are included and undamaged.
2
1
4
6
5
3
A flathead screwdriver is required for
mounting the wall bracket.
PARTS LIST:
Legacy II Light Head Fixture
1
Ground Stake
2
Connector w/Point
3
4
Connector
Deck/Wall/Fence Mounting Bracket
5
Mounting Screws (2)
6
Select a location with full, direct sunlight.
Shady locations will not allow the battery to
charge fully and will reduce the hours of
nighttime light.
NOTE:
The rechargeable Ni-Cd battery
must be allowed to fully charge to
operate properly. Partially
charging the battery on a
consistent basis will drastically
reduce the life of the battery.
The selected location should not be near a
nighttime light source such as a porch light or
street light, as these might keep the solar
lights from automatically turning on. The solar
lights should not be placed closer than 5 feet
from one another. This could cause the solar
lights to flicker from the adjacent light source.
2
Advertisement
Table of Contents
