Mercedes-Benz COMAND Operator's Manual page 45

Automatic seek tuning
Press g or h.
or
Push the joystick to g or G.
The radio will tune in to the next
receivable station (FM, AM) or channel
(WB) with descending/ascending
frequency depending on the direction
of seek.
WB direct channel selection
Press a number key 1 through 7.
i
The selected channel is not shown in
the status line.
Manual tuning (FM, AM)
Activate the desired wave band
( page 41).
Press g or h longer than 2 se-
conds.
The function rapidly scans the
frequencies.
Press g or h repeatedly to
change the frequency step by step.
or
Push the joystick to H or h.
Each push of the joystick will change
the frequency by one step.
FM Band
The frequency displayed will change in in-
crements of 0.2 MHz.
AM Band
Tuning will take place in increments of
10 kHz.
Radio operation
Station selection via direct frequency
entry (FM, AM)
E.g.: 102.7 MHz in the FM band
Activate the desired wave band
( page 41).
Press *.
An input line will appear.
Audio
43