Selecting A Detour - Mercedes-Benz COMAND Operator's Manual

Selecting a detour

The detour function blocks a route section
ahead. If possible, the system will
calculate a detour. You can adjust the
length of the route section to be blocked.
i
If the system does not allow you to
block a route section, the message
Complete detour not possible
is displayed.
Traffic jams are identified by the driver,
not by the COMAND.
Switching on
Activate the soft key display
( page 139).
Detour
Press the soft key.
i
If you have already placed a block on a
route section, the Detour menu will
appear instead of the map
( page 142).
You can now enter the length of the route
section to be blocked.
Navigation*
During route guidance
Press one of the left distance soft keys.
The system calculates a new route
around the blocked route section.
141