Arriving At Destination - Mercedes-Benz COMAND Operator's Manual

Altering the map scale
The current map scale is indicated on the
left side of the status bar.
Press the + or ) soft key.
The map section is zoomed in or
zoomed out. A bar indicating the map
scale appears on the status bar.
Selecting map orientation
A symbol is shown on the bottom left side
of the status bar.
Heading Up
<:
Dynamic map alignment, map is
displayed facing driving direction
pointing up
or
North Up
Y:
Map is displayed facing north
You can select the map orientation
( page 148).
Changing the map display
While route guidance is active, you can
switch between split view and full view.
Split view:
The map is shown on the left side and
information on the next maneuver on
the right.
or
Full view:
Full view of the map.
Press c.
The display changes with every push of
the button.
Navigation*
Route guidance
i
If GPS display ( page 148) is active,
information on your current position is
shown on the status bar.

Arriving at destination

When you reach the destination, you will
see the destination flag. Route guidance
ends.
137