Selecting The State/Province - Mercedes-Benz COMAND Operator's Manual

Selecting the state/province

i
Use the State list for selecting states in
the USA and the Province list for
selecting provinces in Canada.
State
Press the soft key
in the Enter street menu
( page 118)
in the Enter city menu ( page 125).
The Select state/province menu will
appear.
Select state/province menu
Push the joystick to g or G to
select a state.
Press E.
The Enter street menu will reappear
and shows the new state code in the
middle of the screen.
Toggling between State and Province
list
You can toggle between states in the USA
and provinces in Canada.
Push the joystick to H or h.
i
If you have already calculated a route,
you can toggle to the Last list, which
contains up to 5 last selected states or
provinces.
State of Hawaii
When on the mainland, you cannot choose
destinations in Hawaii, because these are
in a database separate from the USA/
Canada. Similarly, when in Hawaii, you
Navigation*
Destination input
cannot choose mainland destinations. The
You must change the state
message
or province in order to use that
destination
will appear in this case, if
such a destination is selected from the last
destinations memory ( page 152), the
destination memory ( page 154) or as
home address ( page 131).
Choose another state or province.
This selec-
The warning message
tion will restart the system.
Last destinations may not be
available, and today's plan
will be erased. Do you wish to
continue?
will appear.
Push the joystick to H to select
Press E to restart.
i
After such a restart, Today's Plan
entries are all deleted. Destinations in
the previous area (for example in Last
Destinations) are kept so that you can
access and delete them.
Yes
.
119