Replacement; Headlamp Aiming - Cadillac 2013 ATS Owner's Manual

2013 ats
Hide thumbs Also See for 2013 ATS:
Table of Contents

Advertisement

To replace the windscreen wiper
blade:
1. Pull the windscreen wiper
assembly away from the
windscreen.
2. Lift up on the latch in the middle
of the wiper blade where the
wiper arm attaches.
3. With the catch open, pull the
wiper blade down towards the
windscreen far enough to
release it from the J-hooked end
of the wiper arm.
4. Remove the wiper blade.
Allowing the wiper blade arm to
touch the windscreen when no
wiper blade is installed could
damage the windscreen. Any
damage that occurs would not
be covered by the vehicle
warranty. Do not allow the wiper
blade arm to touch the
windscreen.
5. Reverse Steps 1 3 for wiper
blade replacement.
Windscreen Replacement
The windscreen is part of the HUD
system. If the vehicle has to have
the windscreen replaced, get one
that is designed for HUD or the
HUD image may look out of focus.
Vehicle Care

Headlamp Aiming

Headlamp alignment has been
preset and should need no further
adjustment.
If the vehicle is damaged in a crash,
the headlamp alignment may be
affected. If adjustment to the
headlamps is necessary, see your
dealer.
10-23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents