Cadillac 2013 ATS Owner's Manual page 134

2013 ats
Hide thumbs Also See for 2013 ATS:
Table of Contents

Advertisement

5-28
Instruments and Controls
All formats will briefly show the
Turn-by-Turn Navigation alerts and
provide details about the next
driving manoeuvre to be made.
When you are near the next
manoeuvre, the HUD displays a
distance bar that will empty the
closer you get to the manoeuvre. All
navigation information is provided to
the HUD by the navigation radio.
Metric
Performance View: This display
gives the speedometer reading (in
English or metric units), rpm
reading, transmission positions, and
gear shift indicator.
The HUD image displayed on the
windscreen will automatically dim
and brighten to compensate for
outside lighting. However, the HUD
brightness control can still be
adjusted as needed.
The HUD image can temporarily
light up depending on the angle and
position of the sunlight on the HUD
display. This is normal and will
change when the angle of the
sunlight on the HUD display
changes.
Polarised sunglasses could make
the HUD image harder to see.
Care of the HUD
Clean the inside of the windscreen
as needed to remove any dirt or film
that could reduce the sharpness or
clarity of the HUD image.
To clean the HUD lens, use a soft,
clean cloth that has household glass
cleaner sprayed on it. Wipe the
HUD lens gently, then dry it. Do not
spray cleaner directly on the lens
because the cleaner could leak into
the unit.
If You Cannot See the HUD
Image When the Ignition Is On
Is anything covering the
HUD lens?
Is the HUD dimmer setting bright
enough?
Is the HUD image adjusted to
the proper height?
Are you wearing polarised
sunglasses?
If the HUD Image Is Not Clear
Is the HUD image too bright?
Are the windscreen and HUD
lens clean?
If the HUD image is not correct,
contact your dealer.
Keep in mind that the windscreen is
part of the HUD system. See
Windscreen Replacement on
page 10 23.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents