Stanley 204063 Quick Reference Manual page 9

Step 5: On the Bluetooth Discovery Results screen,
select Nearby Devices from the Show dropdown list.
The Bluetooth Programming Adapter shall be listed
as StanleyBT-XXXX, where XXXX are the last four
digits of the serial number on the unit label. Select the
Bluetooth and click OK.
Step 7: The M40 Express Setup screen shall be
displayed. At the top of the screen, the Bluetooth icon
and + sign shall indicate a connection. The green LED
on the dongle shall illuminate steady indicating that it
has a connection with the handheld device. At this
point all functions are available and operate the same
as when the cable is used. When the wireless link is
connected and the green LED on the unit illuminates
steady the power remains on and does not time out.
© 2010, THE STANLEY WORKS. ALL RIGHTS RESERVED.
Step 6: The following shall occur: The Bluetooth
Capabilities Check screen shall be displayed. Then, the
Bluetooth Serial Port Connecting... screen shall be
displayed. Then, a series of three small Bluetooth logos
shall be displayed.
Step 8: Refer to Stanley Access Technologies
document No. 203975, "StanVision Sensor
Installation and Operating Instructions Quick-
Reference Guide," and tune-in door.
204063
Rev. B, 11/23/10
8 of 22