Table of Contents
Advertisement
Step 5: TAP the Bluetooth dongle selection.
(Use the window scroll bar if necessary.) TAP Next at
the bottom right of the screen. The Passkey screen
shall be displayed.
NOTE: The Bluetooth dongle will show in the list as
StanleyBT-####, where #### is the last four digits on
the Bluetooth device label. (Note: This is a
hexadecimal string and may contain 0-9 and A-F.)
Also, be sure the power is turned on and it is in range.
Step 7: TAP Done at the bottom left of the screen.
© 2010, THE STANLEY WORKS. ALL RIGHTS RESERVED.
Step 6: On the Passkey page, ENTER 1234, and TAP
Next at the bottom right of the screen. The Device
Added indication shall be displayed.
Step 8: TAP the COM Ports tab at the top left of the
screen.
204063
Rev. B, 11/23/10
14 of 22
Advertisement
Table of Contents
