Table of Contents
Advertisement
Step 13: ENTER the PIN code 1234, and TAP OK.
Step 15: TAP and HOLD the StanleyBT-XXXX icon
selection until the pop-up menu appears, then TAP
Disconnect.
© 2010, THE STANLEY WORKS. ALL RIGHTS RESERVED.
Step 14: OBSERVE that the connector icon shows
green arrows, indicating that the connection is made.
Also OBSERVE that the green LED on the dongle
illuminates steady, indicating that it is connected to the
device.
Step 16: TAP the X icon at the top right of the screen
or the OK button at the bottom of the device. The Start
screen shall be displayed.
204063
Rev. B, 11/23/10
20 of 22
Advertisement
Table of Contents
