Multi Channel Surround Setup; Specifying The Speaker Parameters; Performing Initial Setup Operations - Sony STR-DE1075 Operating Instructions Manual

Performing initial setup
operations
Before using your receiver for the first time,
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 5 1. See pages
17-22 for speaker settings and pages 40,41 for
other settings.
For the best possible surround sound, all
speakers should be the same distance from the
listening position (a).
However, the receiver lets you to place the
center speaker up to 5 feet closer (a), the
surround speakers up to 15 feet closer (@) and
the surround back speakers up to 15 feet closer
(0) to the listening position.
The front speakers can be placed from 3 to 40
feet from the listening position (a).
You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.).
You can use the center and surround back
speakers as surround back left and right
speakers.
When placing surround speakers to your side
When placing surround speakers behind you
Note
Do not place the center speaker farther away from the
listening position than the front speakers.
TiP
When setting up the surround back speaker, set the
speaker at least 1 meter behind the listening position.
It is recommended to place the speaker at an equal
distance from the surround left and right speakers. If
there is no space behind the listening position, set the
speaker above the listening position by placing it on a
stand or hanging it from the ceiling. To prevent
speaker damage or injury in case the speaker falls,
make sure that it is properly fixed in place.
Specifying the speaker
parameters
1 Press SET UP.
2 Press the cursor buttons (< or >) to
select the parameter you want to
adjust.
3 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 until you have set
all of the parameters that follow.
continued
17