Control A~Ii Control System; Basic Functions; About The Connecting Cord - Sony STR-DE1075 Operating Instructions Manual

CONTROL
A711
control system
(continued)
CONTROL Al n and CONTROL Al
compatibility
The CONTROL Al control system has been
updated to the CONTROL A~II which is the
standard system in the Sony 300 disc CD changer
and other recent Sony components. Components
with CONTROL Al jacks are compatible with
components with CONTROL A~II, and can be
connected to each other. Basically, the majority of
the functions available with the CONTROL Al
control system will be available with the
CONTROL AIII control system.
However, when making connections between
components with CONTROL Al jacks and
components with CONTROL Aln jacks, the
number of functions that can be controlled may be
limited depending on the component. For detailed
information, refer to the operating instructions
supplied with the component(s).
Connections
Connect monaural (2P) mini-plug cords in
series to the CONTROL Al11 jacks on the
back of each component. You can connect up
to 10 CONTROL Al II compatible components
in any order. However, you can connect only
one of each type of component (i.e., 1 CD
player, 1 MD deck, 1 tape deck and 1 receiver).
(You may be able to connect more than one CD
player or MD deck, depending on the model.
Refer to the operating instructions supplied
with the respective component for details.)
Example
Amplifier CD
(Receiver) player dMeDck
Tape Other
deck component
Jacks and connection examples
CD player
MD deck
On CONTROL At jacks and
connections
It is possible to make connections between
CONTROL Al and CONTROL Al II jacks.
For details regarding particular connections or
set up options, refer to the operating
instructions supplied with the component(s).
About the connecting cord
Some CONTROL Al compatible components
are supplied with a connecting cord as an
accessory. In this case, use the connecting cord
for your connection.
When using a commercially available cord, use
a monaural (2P) mini-plug cord less than
2 meters long, with no resistance (like the Sony
RK-G69HG).
Basic Functions
The CONTROL Al II functions will operate as
long as the component you want to operate is
turned on, even if all of the other connected
components are not turned on.
In the CONTROL Al II control system, the
control signals flow both ways, so there is no
distinction of IN and OUT jacks. If a
component has more than one CONTROL
Al II jack, you can use either one, or connect
different components to each jack.
42