Multi-Channel Surround Setup - Sony STR-DB925 Operating Instructions Manual

Fm stereo, fm-am receiver
Hide thumbs Also See for STR-DB925:
Table of Contents

Advertisement

Available languages

Available languages

Speaker System Hookup
Notes on speaker system hookup
• Twist the stripped ends of the speaker cords about 2/3
inch (15 mm). Be sure to match the speaker cord to the
appropriate terminal on the components: + to + and –
to –. If the cords are reversed, the sound will be
distorted and will lack bass.
• If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid excessive
output on the speakers.
• The WIRELESS REAR SPEAKER jack is for use with
Sony wireless rear speaker systems only, do not connect
any other speaker systems or components to this jack.
14
GB
Multi-Channel Surround
Setup
For the best possible surround sound all speakers should
be the same distance from the listening position (A).
(However, this unit lets you to place the center speaker up
to 1.5 meters (5 feet) closer (B) and the rear speakers up
to 4.5 meters (15 feet) closer (C) to the listening position.
The front speakers can be placed from 1.0 to 12.0 meters (3
to 40 feet) from the listening position (A).)
B
A
45°
C
Note
Do not place the center or rear speakers farther away from the
listening position than the front speakers.
A
C
90°
20°

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents