Parallel Port Board/Serial Port Board/S-Video Board - Toshiba Satellite A50S Series Maintenance Manual

4.13 Parallel port board / Serial port board / S-Video board
4.13 Parallel port board / Serial port board / S-Video board
Depending on the model, the machine has a different type board (Parallel port board / Serial
port board / S-Video board). Refer to the proper procedures below.
4.13.1 Parallel port board
Removing the Parallel port board
The following describes the procedure for removing the Parallel port board (See Figure 4-27,
4-28).
1. Remove the DC-IN jack and core from the slot of the base assembly.
2. Remove the following screws to remove the harness holder.
• M2.5x4B THIN BIND screw
M2.5x4B THIN BIND
Satellite A50S/TECRA A3X Maintenance Manual (960-534)
Figure 4-27 Removing Harness Holder
4 Replacement Procedures
x2
DC-IN Jack
Harness Holder
[CONFIDENTIAL] 4-39