Procedure 5 Connector Check And Replacement Check - Toshiba Satellite C650 Maintenance Manual

2.5 HDD

Procedure 5 Connector Check and Replacement Check

The HDD, system board or CPU may be faulty. Disassemble the computer following the steps
described in Chapter 4 and perform the following checks:
Check 1 Make sure the following connectors have been firmly connected to the HDD,
system board and CPU.
HDD
If any connector is loose or off, reconnect it firmly and return to Procedure 1.
If there is still an error, perform Check 2.
Check 2 The HDD may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4. If the problem persists, perform
Check 3.
Check 3 The System board may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4. If the problem persists, perform
Check 4.
Check 4 The CPU may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4.
2-13
System board
Satellite/Satellite Pro/C650/C655
2 Troubleshooting
CPU
Maintenance Manual