4 Replacement Procedures
4.9
Display Assembly
Removing the Display Assembly
CAUTION: Use care to avoid that the antenna cable is not caught between the display
assembly and computer.
Remove the display assembly according to the following procedures and Figures 4-12.
1. Turn the computer upside down and remove two M2.5x6 black flat head screws.
2. Restore the normal computer placement and open the display panel.
3. Disconnect the LCD/FL cable from CN3001 on the system board.
4. Remove four M2.5x6 black flat head screws securing the LCD module to the bottom
cover.
4-26
.
M2 5x6 black flat head screw
LCD FL cable
Wireless LAN antenna
CN3001
Figure 4-12 Removing the display assembly
Satellite/Satellite Pro/C650/C655 Maintenance Manual
4.9 Display Assembly