Prepare Boiler Location — Codes & Checklist - Weil-McLain Gold CGa Installation And Maintenance Instructions Manual

GOLD CGa Gas-Fired Water Boiler — Boiler Manual
1a
Prepare boiler location — codes & checklist

Installations must follow these codes:
• Local, state, provincial, and national codes, laws, regulations and ordinances.
• National Fuel Gas Code, ANSI Z3.1–latest edition.
• Standard for Controls and Safety Devices for Automatically Fired Boilers, ANSI/
ASME CSD-1, when required.
• National Electrical Code.
• For Canada only: B149.1 or B149. Installation Code, CSA C.1 Canadian
Electrical Code Part 1 and any local codes.
The CGa boiler gas manifold and controls met safe lighting and
other performance criteria when boiler underwent tests specified
in ANSI Z1.13–latest edition.
Before locating the boiler,
check the following:
• Check for nearby connection to:
• System water piping
• Venting connections
• Gas supply piping
• Electrical power
• Check area around boiler.
other flammable liquids, or other contaminants
Failure to keep boiler area clear and free of
rials, gasoline and other flammable liquids and vapors
result in severe personal injury, death or substantial property
damage.
• Boiler must be installed so that gas control system components are protected
from dripping or spraying water or rain during operation or service.
• If new boiler will replace existing boiler, check for and correct system problems,
such as:
1. System leaks causing oxygen corrosion or section cracks from hard water
deposits.
. Incorrectly-sized expansion tank.
3. Lack of antifreeze in boiler water causing system and boiler to freeze and
leak.
Remove any combustible materials, gasoline and
.
combustible mate-
can
Part Number 550-101-009/0107