Program Overview; Read/Change Program; Manual, Programming-Independent On/Off (Man.) - Gardena C14 Operating Instructions Manual

You can start or end the watering prematurely at any time by pressing the
man. key. The watering time is then 30 minutes.
Read / Change Program
To check the data, you can repeatedly press the O.K. key to run through
the program levels. The levels are selected and checked consecutively.
This does not interrupt the current program cycle.
To change the data, proceed as described above.

Program Overview

Program
number
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
Manual, programming-independent On / Off (man.)
Before and after entering data, you can operate the GARDENA Water
Timer electronic C 14 e manually, independent of the programmed data.
To do this, press the man. key.
Press the MAN key once to activate watering for a maximum of 30 minutes
(LCD : On). Press the man. key again to end watering.
Cycle
No program active
6 hours (4 times daily)
12 hours (twice daily)
12 hours (twice daily)
24 hours (once a day)
24 hours (once a day)
24 hours (once a day)
24 hours (once a day)
2 days
2 days
2 days
3 days
3 days
7 days
7 days
Duration
3 minutes
3 minutes
15 minutes
3 minutes
5 minutes
30 minutes
1 hour
5 minutes
30 minutes
1 hour
30 minutes
1 hour
1 hour
2 hours
37