3. Press the TIRE button to scroll to a tire position.
4. Press the MODE button to select it for editing.
Note: The current tire position number will be dis-
played.
5. Use the TIRE or MODE button to adjust the value
to the number determined in step 6.
6. Press the SET button when the number
representing the desired sensor is achieved. This
returns the display to the tire selection menu.
Scroll to a different tire location and edit the sensor
numbers as above.
7. Press SET button to save and exit this mode.
If more than one tire location contains the same
sensor number, the display will prompt an error
with the conflicting tires filled in and the associated
sensor number. Press any button to return the tire
selection menu and make necessary corrections.
5-44
Note: This display indicates that ID 1 is programmed
in two locations causing the error.
8. Press SET button again
to revert to normal mode.