Tire Pressure Monitor System Gage Warning And Displays - GMC Defense 2006 Owner's Manual Supplement

Tire Pressure Monitor System Gage
Warning and Displays
The Tire Pressure Monitor (TPM) system gage will
be located on the lower left driver side of windshield
molding. The TPM system gage can display
information such as the tire pressure, tire
temperature and warning/alert messages.
A (Programmed Wheel Position): This message will
alert the user of which wheel is being programmed
and if the system is receiving data from that location.
This is also referred to as the Tire Icon.
5-34
B (Alarm Indicator Lamp): This will change color of
the gage backlighting if a wheel problem is detected.
C (Low Pressure Indicator): This message will
display to indicate a low wheel pressure condition.
D (Alert Indicator): This message will display to
alert the user of a problem. When the alert occurs,
stop and check your tire as soon as possible.
E (Learn Mode): This message will display to
indicate the system is in a programming mode for
removing or adding wheel sensors.
F (Towing Vehicle Indicator): This message will
display to indicate that a towed vehicle data has
been received.
G (Numerical Display): The display will indicate the
pressure or temperature of the wheel indicated.
H (Units of Pressure or Temperature): This
message will indicate which unit of measurement
has been selected for the numerical display.
I (Programming Mode): This message will display
that the system is in a programming mode.