Installation Checklist - Rheem 120 Volt Use & Care Manual

Installation Checklist

A. Water Heater Location
B. Water Supply
C. Relief Valve
D. Wiring
❑
Close to area of heated water demand.
❑
Indoors and protected from freezing
temperatures.
❑
Area free of flammable vapors.
❑
Provisions made to protect area from water
damage.
❑
Sufficient room to service heater.
❑
Water heater completely filled with water.
❑
Air purged from water heater and piping.
❑
Water connections tight and free of leaks.
❑
Temperature and Pressure Relief Valve
properly installed and discharge line run to
open drain.
❑
Discharge line protected from freezing.
❑
Power Supply voltage agrees with water
heater rating plate.
❑
Branch circuit wire and fusing or circuit
breaker of proper size.
❑
Electrical connections tight and unit properly
grounded.
11