Table of Contents
Advertisement
CONTROLS AND INDICATORS DIAGRAM
SIDE VIEWS
:
J
2
3
l----...::=::;;;;i;;;;;;
.
dJ:~J-;;;;:;;1'7
1.
DVD Disc Insertion Slot
For loading and removing discs. Insert disc with label side facing up.
2.
AUXIN
This jack is used to supply external audio and video inputs to the unit.
Note: In order to connect an external AN source, the 3.5mm to RCA
connectors pigtail is required.
3.
USB INPUT
Allows for the connection of an USB memory device.
VODDLX10 System
The VODDLX1 0 System has an option that allows the user to select from
two IR transmit and receive codes (M1 or M2). This feature can be used
when
using two VODDLX1 0 sytems in the
same
installation or if the vehicle
has RSA
(Rear
Seat Audio) that uses an
"A"
channel headset. The VODDLX1 0
system comes factory set to M1. When in the M1 mode, the unit will
respond to remote commands when M1 is selected on the remote control
and
will transmit audio on the A channel. When in the M2 mode, the unit
will respond to remote commands when M2 is
selected
on the remote
control and will transmit audio on the B channel.
5
Note: Use 2-channeiiR headphones set to CH B when the monitor is set to
M2
mode.
Note: M1 will appear on the screen for
4~5
seconds.
Selecting a Monitor Code (M1 or M2)
1.
Power ON the unit and wait until M 1 on the OSD appears. M 1 will
appear on the screen for
4~5
seconds.
FMM 88.3MHz
AUXJGAME
FMM
OFF
ovo
Ml
M2
IRTON
IRTOF
F
2. To change the monitor code, press the System Menu button.
SYSTEM MENU
FM MODULATOR
OSD LANGUAGE
DEFAULT DVD
ON/
OFF
SCREEN
MODE
MONITOR MODE
•
WARNING
SEITING
THE MONITOR
TO TH[
M2 MODE
Wtll
REQUIRE USING
2-(HANNEL
HEADPHONES
USE THE DOWN
KEY
ON
THE REMOTE
CONTROL
TO SELECT M1
AND PRESS
OK TO SET
THE
MONITOR TO
M2 MODE
TO
REMAIN
IN THE
M
I MODE
PRESS
OK
Ml
Ml
3.
Use the
~
or
T
cursor buttons to select the Monitor Mode menu
option. Press OK to confirm the setting.
4.
Use the
~
or
T
cursor buttons to select the desired monitor mode,
then press OK to confirm the
setting.
5.
Press the M2 button on the
remote.
6.
Press the System Menu button on the remote to exit.
Advertisement
Table of Contents
