Tuner Operation; Select A Band; Preset Stations - Jensen JCD2006 Installation And Operation Manual

JCD2006

TUNER OPERATION

CD PLAYER / RECEIVER
40 WATTS X 4
RDM RPT INT
13 14

Select a Band

Press the BAND button (9) to change between three FM bands and two AM bands. Each band
stores up to six preset stations.
Tuning
Auto Seek Tuning
Press the TUNE >>| or |<< button (7) for less than three seconds to move to the next station
automatically.
Manual Tuning
Press the TUNE >>| or |<< button (7) for more than three seconds to enter manual tuning
mode. Press the TUNE buttons to change the radio frequency number up or down one step.

Preset Stations

Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Hold a preset button (13-18) for three seconds.
The unit will beep and the preset number will appear in the display.
Recall a Station
Select a band (if needed). Press a preset button (13-18) to select the corresponding stored
station.
Automatically Store / Preset Scan (AS.PS)
Automatically Store
Select a band (if needed). Press the AS.PS button (3) for more than three seconds to
automatically select the six strongest stations and store them in the current band. The new
stations replace any stations already stored in that band.
JCD2006
AS PS
CH
16 17 19
15 18
Preset Scan
Select a band (if needed). Press the AS.PS button (3) to scan stations stored in the current
band. The unit will pause for five seconds at each preset station. Press AS.PS again to stop
scanning when the desired station is reached.
7