Cassette Operation; Playing Cassette Tapes - Jensen JMC-1000 Owner's Manual

CASSETTE OPERATION

PLAYING CASSETTE TAPES

1.) Press the POWER
2.) Slide the FUNCTION selector to TAPE position to select the Tape mode.
3.) Press the Stop/Eject
open the cassette door.
4.) Insert a prerecorded cassette into the slots on the door with the exposed tape
facing down and the full reel on the left side. Close cassette door.
5.) Press the Play
6.) Adjust the VOLUME and EQ controls as desired.
7.) When the tape ends the Automatic Stop System releases the Play
shuts off the tape motor. Press the Stop/Eject
door and remove your tape. To stop the tape before it ends press the Stop/
Eject key at any time.
Fast Forward
Press or
desired portion, or the end of the tape, press the Play
playback, or press the Stop/Eject
Note: the Automatic Stop System does not function in the fast forward
rewind modes.
button to turn the system "On".
key of either deck A or deck B cassette control to
key to begin playback.
and Rewind
key to advance or rewind the tape rapidly. When you reach the
Controls
key to shut off the tape motor. .
23
key to open the cassette
key to resume normal
key and
or