SMA SUNNY TRIPOWER 12000TL-US Installation Manual page 57

SMA America, LLC
7. Release and remove the fan plug.
8.
Damage to the fan due to compressed air
• Clean the fan with a soft brush, a paint brush, or a damp cloth only.
9. Insert the plug of the fan into the pin connector
until it clicks into place.
10. Insert the fan into the inverter until it audibly clicks into place.
11. Attach the ventilation grids on the right and left of the inverter:
• Re-insert the ventilation grid until it snaps into
place.
• Turn the rotary lock of the ventilation grid with
a flat-blade screwdriver until the slot is in a
horizontal position and the arrows point to the
right.
• Ensure that the ventilation grid is securely in place.
12. Commission the inverter (see section 7 "Commissioning", page 39).
13. Check that the fan is working properly (see section 10.5, page 58).
Installation Manual STP12_15_20_24TL-US-IA-en-11
Troubleshooting
57