Registering The Inverter In Sunny Portal; Changing The Systemtime And System Password - SMA SUNNY TRIPOWER 12000TL-US Installation Manual

SMA America, LLC
8.2

Registering the Inverter in Sunny Portal

If you want to use the Webconnect function and monitor your system in Sunny Portal, you must register
your inverter in Sunny Portal.
Requirements:
☐ The inverter must be connected to a router with an Internet connection and must be integrated
in your network. If the router does not support DHCP, or if DHCP is deactivated, you can use the
SMA Connection Assist to integrate the inverter into the network (see www.SMA-Solar.com).
☐ The Internet address, registration ID (RID) and identification key (PIC) for registration in
Sunny Portal must be available (see the additional label on the inverter or the supplementary
sheet with information on SMA Speedwire/Webconnect).
Procedure:
• Register the inverter in Sunny Portal (see the user manual of Webconnect plants in Sunny Portal).
8.3 Changing the System Time and System Password
To protect the inverter against unauthorized access and administer the system correctly, change the
standard system password and the system time with a communication product (for further information
refer to the manual of the communication product).
Requirements:
☐ A computer with an Ethernet interface must be available.
☐ A communication product that is appropriate for the type of communication used must be
installed on the computer, e.g. Sunny Explorer from version 1.06.
☐ The system must be registered in the communication product.
Procedure:
• Change the standard system password. This protects your system from unauthorized access.
• Change the system time.
Installation Manual STP12_15_20_24TL-US-IA-en-11
Configuration
41