SMA SUNNY TRIPOWER 12000TL-US Installation Manual page 55

SMA America, LLC
5. Remove the fan slowly from the inverter.
6. Release and remove the fan plug.
7.
Damage to the fan due to compressed air
• Clean the fan with a soft brush, a paint brush, or a damp cloth only.
8. Insert the plug of the fan into the pin connector
until it clicks into place.
9. Insert the fan into the inverter until it audibly clicks into place.
10. Push the fan guard into the retainer until it audibly clicks into place.
11. Clean the fan on the left-hand side of the enclosure (see section 10.4.2, page 56).
Installation Manual STP12_15_20_24TL-US-IA-en-11
Troubleshooting
55