Table of Contents
Advertisement
4.5.2
Event
This section covers notifications due to internal system event warnings.
Event: Select from the following event types.
Fan Failure
HD Temperature
HD Failure
HD Full
HD Off
Power Loss
Record Stop
Network Loss
Figure 4-11 Alarm & Event Menu – Event
Fan is not working.
Hard drive is over the safety warning temperature.
If DVR fails to detect the HDD on start up, the system will create an HD failure
event.
If the DVR is not set to Overwrite in the Record Menu, an event will be created
when the HDD is filled.
If HDD are switched off or are removed, the DVR will create an HD OFF event.
If power is disconnected.
If DVR stops recording process.
If connection to the local network is lost, DVR will create a Network Loss event.
NOTE: This function only checks the physical connection (link) to the network.
Any network behavior that blocks data connectivity (blocked ports, IP
addressing errors, etc.) is not detected by this function.
52
Advertisement
Table of Contents
