LS 215e Important Safety Instructions Important Safety Instructions Caution: To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only.
Brand name: Blaupunkt Responsible party: M3 Electronic GmbH Gutenbergstrasse 5, D-65830 Kriftel. Germany Hereby, Blaupunkt Competence Center Audio M3 Electronic GmbH, declares that this Class 1 equipment is in compliance with the essential requirement and other relevant provisions of Directive 1999/5/EC.
Page 42
LS 215e 11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products, including amplifiers that produce heat. No naked flame sources, such as lighted candles, should be placed on the apparatus.
Page 43
LS 215e 24. The only means of completely disconnecting the product from the power supply is by removing the power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times while the product is in use.
Page 44
LS 215e Warning Please read below safety warning carefully. Also, please be pay attention to the safety mark on the unit. The unit operation should follow up the instructions properly. Connect unit to appropriate Keep the unit and power plug power source as shown on the away from water.
Page 45
LS 215e Accessories Part 1 Part 2 Part 3 Part 4 Part 5 Part 6 Part 7 Part 8 150mm 30mm 270mm Part 9 Part 10 Part 11 Part 12 Part 1: Power cable x 1 pcs Part 2: Speaker Cable x 2 pcs...
LS 215e Install The Remote Control Battery 1. Remove the battery cover. 2. Insert the AAA batteries into the battery compartment. Make sure the polarity direction of battery will follow up the symbols in the battery compartment. 3. Re-cover the battery.
Page 47
LS 215e Soundbar installation. The Soundbar have detachable design, which means tabletop, floor-standing and wall- mounting is available for playing. Photo 1 Photo 2 1. Play the Soundbar on table. A. Follow up the Photo 1 to assemble the left and right speaker of Soundbar with the adaptor.
Page 48
LS 215e Photo 5 Caution: a. Before you put the Soundbar on the table, please make the tabletop can sustain the weight of Soundbar. b. Do not carry or drag the Soundbar with one hand to avoid damage issue happen.
Page 49
LS 215e Photo 8 Photo 9 Caution a. Ensure that the installation location is strong enough to support Soundbar. b. Check the material of the wall, if the wall is made of plaster board, marble, or iron board, purchase and use the appropriate fixing screws.
Page 50
LS 215e Panels 1. SOURCE BUTTON 2. VOLUME + 3. PREVIOUS BUTTON 4. DISPLAY SCREEN 5. INDICATOR LIGHT 6. REMOTE CONTROL SENSOR 7. STANDBY BUTTON 8. NEXT BUTTON 9. VOLUME - 1. POWER ON/OFF 2. POWER SUPPLY OUTPUT (ARC) 3. L/R SPEAKER OUTPUT 4.
LS 215e Remote Control Usage Before you use the remote controller, please check if you have installed battery inside. The remote controller should direct to the remote sensor which is locate on the front panel of subwoofer. If the remote controller does not work, please try to adjust the direction angle and distance with subwoofer.
LS 215e Basic Operation Preparation 1. Before you turn on the unit, please check whether all connections are connected properly and safe. 2. Press the POWER ON/OFF button on the rear panel of subwoofer to turn on the main power. Then the LED indicator on the front panel of subwoofer will light up.
Page 53
LS 215e Audio Coperation (ARC) LS 215e To entertain music with Soundbar system; Please choose correspond cables connect with the soundbar. You can connect the Soundbar with TV, DVD players or other audio devices. 1. HDMI OUT(ARC) connection Using a HDMI cable connect the HDMI OUT jack on the rear panel of subwoofer to the HDMI IN jack on your TV.
Page 54
LS 215e HDMI & Audio Operation 1. HDMI ARC operation. The Soundbar has built-in the HDMI V1.4 ARC function. If your TV can support HDMI V1.4 ARC as well, then you can entertain the music base on ARC connection. Step1. Using a HDMI cable connects the HDMI out jack on the rear panel of subwoofer to the HDMI IN jack on the TV.
Page 55
LS 215e 5. OPTICAL operation. Using an optical cable connect the optical input jack on the rear panel of subwoofer to the optical output jack of your other audio device. Press the Opt key on the remote controller enter to the optical play mode, and then you can enjoy the music entertainment.
3. Turn on the Bluetooth function on your other Bluetooth device (Like mobile phone etc.), Then your Bluetooth device will search the Soundbar. Please select the “BLAUPUNKT LS 215” on your Bluetooth searched list. Then your Bluetooth device will pair with Soundbar automatically. If prompted and requested password, please input “0000”.
LS 215e Trouble Shooting Power supply cannot be turned on Make sure that the power plug is full plug in the power outlet. The remote control does not work a. The Battery was used up, please replace the battery. b. The remote controller does not aim to the remote sensor on the front panel of subwoofer.
Page 58
There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. All rights reserved by Blaupunkt Competence Center Audio M3 Electronic GmbH. This material may be reproduced, copied or distributed for personal use only.