Table of Contents
Advertisement
How to Delay Start
of Cleaning
Delay Start is setting the oven timer
to start the clean cycle automatically
at a later time than the present time
of day. NOTE: Before beginning
make sure the oven clock shows the
correct time of day.
Quick Reminder—
Delay Start for Self-Clean:
1.) Prepare oven for cleaning.
2.) Touch CLEAN pad.
3.) Touch INCREASE pad.
4.) Touch STOP TIME pad.
Time that appears is 3 hours
later than the time of day. Press
INCREASE pad until the Stop
Time you desire appears in the
display. The self-clean cycle
will automatically begin 3
hours before the stop time
you select.
For example: Let's say it's 7:00
and you want the oven to begin
self-cleaning at 9:00 after you're
just soiled a normal amount so the
normal Clean Time of 3 hours
is preferred.
Step 1: Prepare the oven for cleaning.
Step 2: Close the oven door and
slide latch handle to the right as far
as it will go.
Step 3: Touch CLEAN pad.
Step 4: Touch INCREASE pad,
Step 5: Clean time for heavy soil
can be set for 4 hours. If a longer
or shorter Clean Time is desired,
press INCREASE or DECREASE
pad until desired Clean Time is
displayed.
Step 6: Touch STOP TIME pad.
" 10:00" appears on display and
"STOP TIME" flashes. The
control automatically sets Stop
Time by adding the Clean Time to
the time of day. In this example,
the time of day is 7:00 and the
Clean Time is 3 hours. Adding
3 hours to the time of day "
equals 10:00.
Step 7: Change Stop Time from
INCREASE pad until " 12:00"
appears in the display. The words
"DELAY CLEAN" will also
appear in the display.
The self-clean cycle will
automatically begin at 9:00 and
finish at 12:00. The word "ON"
will appear on the display at 9:00,
When the oven heats to a high
temperature, the word "LOCK"
will be displayed and, a short time
later, the door latch handle will be
locked in position. It will not be
possible to open the oven door
until the temperature drops below'
the lock temperature.
When the clean cycle is finished,
the word "CLEAN" will go out
in the display and the oven will
begin to cool. When the oven
temperature has fallen below the
locking temperature (about 20-30"
minutes after the word "CLEAN'.
goes out at the end of the clean
cycle), the word "LOCK" goes
out and the door can be opened.
Step 8: When the LOCK light is
off, slide latch handle to the left ai
far as it will go and open the door.
Never force the latch handle.
Wait until the word "LOCK"
goes out in the display. Forcing
the latch handle may damage the
door lock.
23
Advertisement
Table of Contents
