Manual Operation - York R-410A User Manual

MANUAL OPERATION

Ceiling & Floor
This function is used to operate the unit temporarily in case you misplace the remote controller or its
batteries are exhausted. Two modes including AUTO and FORCED COOL can be selected through
the TEMPORARY BUTTON on the air-in grill control box of the indoor unit. Once you push this
button, the air conditioner will run in such order: AUTO, FORCED COOL, OFF, and back to AUTO.
1 AUTO
The OPERATION lamp is lit, and the air conditioner will run under AUTO mode. The remote
controller operation is enabled to operate according to the received signal.
2 FORCED COOL
The OPERATION lamp flashes, the air conditioner will turn to AUTO after it is enforced to cool
with a wind speed of HIGH for 30 minutes. The remote controller operation is disabled.
3 OFF
The OPERATION lamp goes off. The air conditioner is OFF while the remote controller operation
is enabled.
Four-way Cassette
This function is used to operate the unit temporarily in case you misplace the remote controller or its
batteries are exhausted. Two modes including AUTO and mandatory COOL can be selected through
the TEMPORARY BUTTON on the air inlet grill control box of the indoor unit. Once you push this
button, the air conditioner will run in such order: AUTO, mandatory COOL, OFF, and back to AUTO.
AUTO
1
The OPERATION lamp is lit, and the air
conditioner will run under AUTO mode. The
remote controller operation is enabled to operate
according to the received signal.
MANDATORY COOL
2
The OPERATION lamp flashes, the air conditioner
will turn to AUTO after it is enforced to cool with a
wind speed of HIGH for 30 minutes. The remote
controller operation is disabled.
OFF
3
The OPERATION lamp goes off. The air
conditioner is OFF while the remote controller
operation is enabled.
14
TEMPORARY
BUTTON