Beeper Definitions - Symbol LS4278 Quick Reference Manual

Scanning
012345
012345

Beeper Definitions

The scanner issues different beep sequences and patterns to indicate status. The table
below defines beep sequences that occur during both normal scanning and while
programming the scanner.
Beeper Sequence
Standard Use
Low/medium/high beeps
High beep
Four long low beeps
Five low long beeps
Low/high/low beeps
High/high/high/low beeps
Parameter Menu Scanning
Long low/long high beeps
High/low beeps
High/low/high/low beeps
Long low/long high/long low/long high
beeps
Wireless Operation
High/low/high/low beeps
012345
Indication
Power up.
A bar code symbol was decoded (if decode beeper is enabled).
A transmission error was detected in a scanned symbol. The
data is ignored. This occurs if a unit is not properly configured.
Check option setting.
Conversion or format error.
ADF transmit error.
RS-232 receive error.
Input error, incorrect bar code or "Cancel" scanned, wrong en-
try, incorrect bar code programming sequence; remain in pro-
gram mode.
Keyboard parameter selected. Enter value using bar code key-
pad.
Successful program exit with change in the parameter setting.
Out of host parameter storage space. Scan
page 6.
Pairing bar code scanned.
3
012345
Set Defaults on