HoMedics ProgressTracker SC-372 Instruction Manual page 4

NOTE: This step will only appear if you have weighed yourself at least twice since setting
your Starting Weight.
8. Scale turns off automatically.
NOTE: Pounds lost and % of pounds lost will show as a negative number under the
symbol. Pounds gained and % of pounds gained will show as a positive number
under the symbol.
As the scale is used for an extended period of time, changes in weight will be displayed on
three consecutive screens. See Example 1 on Page 4.
Using the Scale – Weight-Only Mode
1. Step on the scale and stand still.
2. Weight will lock in, flash, and display for 10 seconds.
3. Scale turns off automatically.
Using the Scale – Delete Starting Weight From Memory
1. With scale off, press the SET,
dE + USER 1 appears in the top display window (Figure 2).
2. To delete USER 1, press and hold the SET BUTTON until PASS appears in the display
window (Figure 3).
3. If you do NOT want to delete USER 1, wait for the display to cycle through each MEMORY
Location. When the MEMORY Location you want is shown on the display, press and hold
the SET BUTTON until PASS shows on the display. PASS confirms the MEMORY location
LAST WT
data has been deleted.
Scale will turn off automatically once all MEMORY locations have cycled through.
4. To set a new Starting Weight, see Getting Started – Setting "Starting Weight".
USER
lb
USER
and
lb
USER
lb
WT
USER
BUTTONS at the same time until
WT
USER
WT TL
Figure 2
USER
Figure 3
3
USER
lb
USER
lb
USER
lb
WT TL
USER