Table of Contents
Advertisement
What's in this Guide?
Standby
The Standby Control setting determines whether the system should go
into standby mode or not.
Control On: The system will go into standby mode when the
Standby Delay has timed out. Requires the Standby Delay to be set to
an appropriate value.
Control Off: The system will not go into standby.
Delay: Defines how long (in minutes) the system will wait before it
goes into standby mode. Requires the Standby Control to be enabled.
Range 1–480 minutes.
System Unit
Enter a System Name to define a name of the system unit. The
system name will be displayed when the E20 is acting as an SNMP
Agent and towards a DHCP server.
Bluetooth™ can be set to On or Off.
HearingImpairedMode
On: If this setting is on, the device will play a blinking, orange video
whenever there is an incoming call.
Off: Default
Name
Readable name of the device, e.g. Joe's E20
MenuLanguage
This setting allows you to set the menu language, if necessary.
D14330.09 TANDBERG E20 ADMINISTRATOR GUIDE (TE2.1) February 2010
Introduction
Deploying E20
Using E20
Time
Allows you to set the time zone accordingly.
Video
Set the Selfview to On or Off. Selfview is the outgoing video (what the
others see) from your E20, adjust the brightness of the image and select
wallpaper.
Change password
This allows you to change the administrator password on the device. This
is done by entering the password in the password field and pressing the
Save button. The User can cancel the password update by pressing the
Cancel button.
Restart
Use this to reboot the E20 in a controlled manner.
37
Advanced Settings
The Settings
Advanced settings
Hide quick links:
Advertisement
Table of Contents
