Peavey MediaMatrix NION Hardware Manual page 41

So me text to force a page break in Word but remain invisible
Setting up synchronization
Scenario
You want to be able to set the time
and date on any MediaMatrix node on
the network manually, and for the
settings to then be automatically
assigned to the others.
You want the time and date for all
nodes on the network to be obtained
automatically from a single, master
unit.
You do not want anyone to be able to
assign times and dates to the other
units by accessing them directly.
You will specify the time manually.
September 30, 2010
Actions to take
On all MediaMatrix nodes:
1. Navigate to the Time and Timezone tab.
2. Clear the Time Server box.
3. In the Authority list, click normal.
4. Click Set.
If you want to adjust the time and date, perform these
steps on any MediaMatrix node:
1. In the Time (24hr) box, type the new time in the
format HH:MM:SS.
2. In the Date (mm/dd/yy) box, type the new date
in the format mm/dd/yy.
3. Under the Date (mm/dd/yy) box, click Set.
4. If you are using a NION, under Timezone,
specify a continent and country.
5. If the country has more than one time zone, in the
Zone list, click the time zone.
Tip: Where a country has only one time zone,
you do not need to make a selection.
6. Under the Zone box, click Set.
On the master node:
1. Navigate to the Time and Timezone tab.
2. Clear the Time Server box.
3. In the Authority list, click Master.
4. Click Set.
If you want to adjust the time and date, perform these
steps on the master node:
1. In the Time (24hr) box, type the new time in the
format HH:MM:SS.
2. In the Date (mm/dd/yy) box, type the new date
in the format mm/dd/yy.
3. Under the Date (mm/dd/yy) box, click Set.
4. If you are using a NION, under Timezone,
specify a continent and country.
5. If the country has more than one time zone, in the
Zone list, click the time zone.
Version 1.6.1.0
NION Hardware Manual
37