Peavey MediaMatrix NION Hardware Manual page 35

SNMP
Simple Network Management Protocol is a network protocol that provides robust monitoring
and control of system parameters across the network. Using SNMP, you can utilize a host of
standard software tools and third-party systems to extend the control and monitoring power of
the NION for a wide variety of applications.
Enabling or disabling services
The NETWORK SERVICES page provides access to global network services. Each control
is a two-state control where the service is either on (ENABLED) or off (DISABLED).
To enable or disable services
1. From the main menu, select CONFIG to display the first configuration page, LAN
CONFIG, then select NEXT repeatedly until the NETWORK SERVICES page is
displayed.
2. Use the wheel and wheel push button to enable or disable each service as required.
3. When you are satisfied with the services settings, select APPLY and press the wheel
button to complete the adjustment.
Configuring security
You can prevent users from controlling the NION via the front panel by enabling security and
then selecting the LOCK option from the main menu.
When security is enabled, the user must enter a four digit numeric password (called a
combination) before they can access any settings.
Caution: The FRONT PANEL COMBO feature will secure the NION from front panel
access. A lost combination cannot be retrieved and there is no back door. If the combination is
lost, the NION must be reset to a virgin state, thereby discarding any resident audio
configuration files. Use the FRONT PANEL COMBO and LOCK features with care.
Enabling security
1. From the main menu, select CONFIG to display the first configuration page, LAN
CONFIG, then select NEXT repeatedly until the FRONTPANEL COMBO page is
displayed.
September 30, 2010 Version 1.6.1.0
NION Hardware Manual
31