Restore Project; How To Save Your Work - Roland Fantom G6 Features Manual

Restore Project

The Restore Project operation copies the data in a FantomG.Bak folder—
created using the Backup Project operation—into the Fantom-G's internal
flash memory, and loads the data into work and sample RAM. The Fantom-G
is also set so any new work you store goes into the project's folders in
internal flash.
Backup project folders
in USB ash
Backed-up
Backed-up project data is loaded
project data
is copied
Project folders Project folders
in internal ash in USB or internal ash
New project data will be stored
Performing a Restore Project Operation
Make sure your current project doesn't contain anything you haven't
stored before you restore a backup—otherwise, that material will be
lost when the backed-up project is loaded into work and sample RAM.
On the Project Menu screen, click F6 (Restore)—the Fantom-G asks if
1
you're sure you want to proceed.
Click F7 (OK) to perform the restore operation, or F8 (EXIT) to cancel
2
it.
The backed-up project on your USB stick is copied into internal flash,
and its data is loaded into work and sample RAM. The Fantom-G is
pointed at the internal project's folders for any new work you store.
Fantom-G
work and sample RAM

How to Save Your Work

Here's a table of the things that are stored in a project, and the methods used
for storing them. After the table, we'll explain the methods mentioned.
You can store a: By using:
Patch the Write Menu.
Rhythm set the Write Menu.
Sample set the Write Menu, or F7 (Write) on the Pad
Setting screen in the Sample Pad pad mode.
Live set the Write Menu.
Studio set the Write Menu.
Phrase the Write Menu.
Song the Write Menu.
Sample the Write Menu.
Rhythm pad setup F7 (Write) on the Pad Setting screen in the
Rhythm pad mode.
Chord set F7 (Write) on the Pad Setting screen in the
Chord Memory pad mode.
Arpeggio set F7 (Write) on the Pad Setting screen in the
Arpeggio pad mode.
RPS set F7 (Write) on the Pad Setting screen in the
RPS pad mode.
Rhythm pattern set F7 (Write) on the Pad Setting screen in the
Rhythm Pattern pad mode.
Bookmark F8 (Exit) on the Pad Setting screen after
registering the bookmark in Bookmark pad
mode.
User group F5 (Regist) on the Pad Setting screen in the
User Group pad mode.
Favorite F8 (Regist) on the Favorite Edit screen.
Wallpaper choice F7 (Sys Write) after changing the wallpaper.
System setting F7 (Sys Write) on the System Setup screen.
14